TimbaBuild EWS - Epoxy Stabiliser/Primer - 225ml

Timbabuild Epoxy Wood Stabiliser is a specially designed two-part low viscosity, solvent free, resin primer which is designed to strengthen weakened wood fibres by penetrating deep into the wood.
EWS is designed to be used as a primer in conjunction with the Epoxy Rapid Cure (ERC10) or Epoxy High Build (EHB60) systems. Once the damaged, decayed and discoloured wood has been removed by use of a suitable cutter tool such as a router or chisel, then the area to be treated is lightly sanded to ensure excellent adhesion. The moisture content of the wood should be no greater than 18% (check using a standard moisture meter) and damp wood should be allowed to dry naturally, or by way of a hot air gun. The two components are mixed manually into a separate container, and thoroughly agitated for one minute.
The 2:1 mixing ratio should be strictly observed. EWS should be applied using a standard brush and left to cure for at least 20 minutes.
Key benefits
· Solvent Free - suitable for indoors and outdoors
· Excellent Penetration due to the Low Viscosity
· Pre-measured to Volume 2:1 ratio to ensure accurate mix
· High Strength & Durability
· Fast and Simple to Use, Easy to Clean and Store
· Used with both the ERC10 & EHB60 systems
Estimated* Coverage:
Substrate | Coverage per 225ml pack (m2)
|
Hard wood Soft Wood Damaged Wood |
2.0 1.5 1.0 |
* This coverage is a guide only based on our own internal tests.